I have seen stainless steel cause tremendous corrosion to aluminum in a
corrosive atmosphere however I have not seen any reaction between
galvanized steel and aluminum. I suppose anything is possible. Zinc and
aluminum are not that far apart on the galvanic chart.
John KK9A
To:TOWERTALK@contesting.com
Subject:Re: [TowerTalk] Fwd: Fwd: Aluminum Towers -- Tower Installer in S.F.
Bay Area??
From:Cqtestk4xs@aol.com
Date:Mon, 13 Aug 2012 18:18:49 -0400 (EDT)
List-post:<towertalk@contesting.com">mailto:towertalk@contesting.com>
I would also add, that if you are going to guy with galvanized EHS, put
the wire inside a piece of hose so the aluminum does not touch the guy
wire.
If they touch, you will have galvanic action on the aluminum...not a good
thing.
Bill K4XS/KH7XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|