Good afternoon,
I am in process of planning cable runs from the tower to the shack, with
the cable screens bonded to a ground plate at the tower base and again at
an external grounded copper plate mounted on a short post prior to entry
into the shack.
I recall that in the past, PL259 back to back female bulkhead adaptors
were available with a large hexagonal flange as an integral part of their
body manufacture, you simply drilled a hole in a bulkhead, passed the
adaptor through, up to the fix hexagonal flange, and placed a suitably
sized nut on the thread, on the other side of the bulkhead, and tightened
it up.
I have made enquiries, looked through catalogues, lists etc. but such
adaptors appear to be no longer available, certainly in the UK. I have
need of 12 such bulkhead adaptors, if anyone knows the manufacturer or can
point me to a source.
73, John G3JVC/GM3JVC.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|