Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: the future of antenna and tower inspection

To: "'W0MU Mike Fatchett'" <w0mu@w0mu.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Fwd: the future of antenna and tower inspection
From: <w5gn@mxg.com>
Date: Mon, 15 Apr 2013 09:55:34 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Can you use one of these things to hold up a 135 foot vertical?
That also feeds 12 volts to keep it up?

Barry, W5GN

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of W0MU 
Mike Fatchett
Sent: Monday, April 15, 2013 9:26 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Fwd: the future of antenna and tower inspection

A great use for a drone.

Mike W0MU

On 4/15/2013 6:41 AM, Mike & Becca Krzystyniak wrote:
> My son used his 6 blade to inspect my tower over Easter.  With a HD 
> camera and stabilization software, you can see quite a lot.  He was 
> flying it in between the elements on my HF Yagi.
>
> Now, to put a wrench and soldering iron on the thing...
>
> Mike K9MK
>
>
>
>   
>
> -----Original Message-----
> From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of 
> David Robbins
> Sent: Monday, April 15, 2013 6:49 AM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] Fwd: the future of antenna and tower 
> inspection
>
> its a Parrot AR-Drone 2.0.  http://ardrone2.parrot.com/usa/ i have 
> flown it around my living/dining room (has about 12' vaulted ceiling) 
> a dozen or so times... but that was only my 3rd or 4th attempt outside 
> as it has been rather windy up here.  it is very easy to fly as it 
> stabilizes itself with internal gyros, uses a downward looking low-def 
> camera (that you can also watch remotely) to sense motion over the 
> ground, and has both ultrasonic and pressure sensors for altitude 
> control... so take your hands off the controls and it stops where it 
> is and hovers.  plus there is one-button takeoff and landing, which are 
> usually the hardest things to master.
>
>
> Apr 14, 2013 06:17:14 PM, hanslg@aol.com wrote:
>
> Really, really nice. What exactly is it you have there and how long 
> did you have to train before you could make that perfect flight.
>
>
> Seems good for inspections of your rigs.
>
>
> Hans - N2JFS
>
>
>
> -----Original Message-----
> From: K1TTT
> To: antennas ; reflector -tower
> Sent: Sun, Apr 14, 2013 3:12 pm
> Subject: [TowerTalk] the future of antenna and tower inspection
>
>
> Well, except for the part where I chase the dog around the yard that is.
>
> http://www.youtube.com/watch?v=KIfhRzGo8uI
>
>
>
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://wiki.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>