> I am looking for some 502 johnny ball insulators to use in re-guying a
tower. The old insulators are the little type 500Ds, which have lasted 33
years but don't have the proper contour to correctly seat Big Grips, plus I
prefer to use proper insulators for the purpose this time.
Just a point of information. PreFormed grips have 2 sets of crossover
marks on them. The marks closest to the loop is for normal steel guy wire
application. The second set farther away from the loop is for when you
install the grips around Johnny ball insulators. This makes the angle more
agreeable than using the first set of crossover marks with an insulator.
Cheers,
Steve K7LXC
TOWER TECH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|