I use a six position relay box for 160-10 and then a separate relay box
on the output for each band where I have more than one antenna. The
secondary box allows me to use individual antennas or multiple antennas
driven in phase.
John KK9A
On 2013-07-15 12:02, Jeff Blaine wrote:
> 160-6 with monoband types on most bands, and in some cases multiple antennas
> per band (eg. vert + dipole).
>
> 73/jeff/ac0c
> www.ac0c.com [1]
> alpha-charlie-zero-charlie
>
> -----Original Message-----
> From: john@kk9a.com
> Sent: Monday, July 15, 2013 9:23 AM
> To: towertalk@contesting.com
> Subject: Re: [TowerTalk] cascading RCS-12
>
> [TowerTalk] cascading RCS-12
> Do you operate on 12 different bands though the same feedline?
>
> Subject: [TowerTalk] cascading RCS-12
> From: "Jeff Blaine" <keepwalking188@yahoo.com>
> Date: Sun, 14 Jul 2013 22:19:54 -0500
> List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>
> I have the Ameritron RCS-12 that I use in conjunction with a couple of
> switches. This is an 8-position unit and it's very flexible with respect to
> configuration. But I need more switch selection positions (around 12
> total).
>
> So I was thinking of perhaps cascading two of these boxes. There are a
> couple
> of ways that could be done.
>
> Has anyone found a better solution or done something similar?
>
> 73/jeff/ac0c
> www.ac0c.com [1]
> alpha-charlie-zero-charlie
>
> _______________________________________________
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk [2]
Links:
------
[1] http://www.ac0c.com
[2] http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|