Check out Ufer grounds. If you insure your base rebar is well tied and
the tower anchor bolts electrically tie to the rebar (I welded small
rebar connections to the anchor bolts, but several good tight wire ties
would also work) then you have an excellent start on grounding the
tower. Additional ground rods should be spaced away from the concrete,
usually by the length of the ground rod. Much is written here about how
many and how to tie the ground rods together, search the archives.
Grant KZ1W
On 7/16/2013 5:45 PM, les wrote:
I am putting up a new tower and was wondering if the ground rod for it
can go through the concrete in the base or is it better to place it
outside the concrete base?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|