It's not a problem at all if you just drop two of the top guys when
installing the antenna.
John KK9A
To:"Mark Robinson" <markrob@mindspring.com>, "Jay Kesterson"
<k0gu@verinet.com>
Subject:Re: [TowerTalk] Rohn 45AG4 guy tabs?
From:"Jim W7RY" <w7ry@centurytel.net>
Reply-to:Jim W7RY <w7ry@centurytel.net>
Date:Fri, 16 Aug 2013 17:11:20 -0700
I agree. Having the guys on the top plate is a real pain. My first Rohn
25
was like that. It was very frustrating installing a beam with a tram
system.
Install a guy ring 4-5 feet down the tower.
73
Jim W7RY
-----Original Message----- From: Mark Robinson
Sent: Friday, August 16, 2013 1:59 PM
To: Jay Kesterson
Cc: TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?
Yes I believe that they can be used to secure the guys. I chose not to do
this since it is already cluttered up there and having the guys attached
to
the top plate makes working on the antennas more difficult.
The angled down guy anchor points on the top plate made a good point to
secure the coax loop though.
I mounted my top guys several feet below the top plate.
73 Mark N1UK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk