How about putting the preamp up on the mast, just above the lower
antenna? That way, the ONLY coax going down past the tower-top is a
single run to the preamp. You could affix the coax from the two
antennas ABOVE the preamp, moving the loops of cable away from the
tower-top.
73
Don
N8DE
Quoting Lizeth Norman <normanlizeth@gmail.com>:
Up that is!
Hi All!
I've got a 20' stick of Rohn 25 with a Yaesu 5600b (split with the az in
the tower on a Rohn plate and the el up on a mast) rotating a pair of M2
antennas. Installed with the antennas are a pair of frames to route the
cables from the antennas to the cross mast.
This feeds a box where the preamps are housed, about 3' down the tower. My
problem is that the loops from the crossarm to the have in the past gotten
hung up.
The tower is on a Rohn tilt base. When it goes up the next time, I'd like
it to be for a while. Do love playing with satellites, but the up and down
with the tower is a pain.
Suggestions, comments and photos appreciated!
Norm n3ykf
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|