Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 45

To: Gregg Seidl <k9kl@centurytel.net>, "TowerTalk@contesting.com" <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Rohn 45
From: "Hector Garcia,XE2K" <j_hector_garcia@sbcglobal.net>
Reply-to: "Hector Garcia,XE2K" <j_hector_garcia@sbcglobal.net>
Date: Wed, 25 Dec 2013 11:56:03 -0800 (PST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Gregg
Merry Xmas
My idea can be cut the R25 legs about 23 inch from the concrete
later  Weld or  bolt some thick steel angles like  3/8   or 5/16  where I can 
attach some 1/2 inch  long bolts  to joint the  flat base of R45 
like the ones you can buy on HD or Lowes with the epoxy
the angles need to be welded together  and  adding some extra bolts
with epoxy to the concrete pad can be an extra security
I will do both to be safe
But if you have no experience hire a guy who can cut, make and  weld the base
and can drill the holes  and place those extra bolts correctly with the epoxy.

but is possible going that way  if  the cost is not the correct for you
check removing that concrete  and adding a new one with a short R45 base
sometimes can be  better for mind rest
I made 3 Installations using  2 and 3 R45 sections   up and one half poured in 
concrete
to install some WIFI equipment and are very solid

Check your options and cost, select what give you more peace of mind
 
J.Hector Garcia  XE2K / AD6D
Mexicali B.C  DM22fp / El Centro
P.O.Box 73 
El Centro CA 92244-0073
http://xe2k.net
Tweeter @XE2K




________________________________
 From: Gregg Seidl <k9kl@centurytel.net>
To: TowerTalk@contesting.com 
Sent: Wednesday, December 25, 2013 11:06 AM
Subject: [TowerTalk] Rohn 45
 

I want to remove a Rohn 25 that I have buried in the cement. I want to reuse 
the  concrete base and attach Rohn 45 in its place. I want to install about 28 
feet of Rohn 45 with a small 6 meter array,4 antenna but only 5 elements each. 
The antenna  box will be about 24 feet by 24 feet. There will be about 18 
square feet of wind load on the tower. Is this possible? Should I did out the 
base and plant the 45 in the hole and re-cement? Can holes be drilled down into 
the concrete and a base plate used for 45 be attached using bolts and some type 
of epoxy?

Gregg K9KL
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>