Towertalk
[Top] [All Lists]

[TowerTalk] FW: FW: Beverage Layout Problem

To: <towertalk@contesting.com>
Subject: [TowerTalk] FW: FW: Beverage Layout Problem
From: "Matt" <maflukey@gmail.com>
Date: Wed, 14 May 2014 14:42:21 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks Pat - just wanted to confirm that I used the wrong term - NOT
autotransformer, but isolation transformer....

Matt

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
Patrick Greenlee
Sent: Wednesday, May 14, 2014 8:18 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] FW: Beverage Layout Problem


On 5/13/2014 9:57 PM, Matt wrote:
>   IMHO, best to wind Beverage baluns as autotransformers (input 
> windings separate from output windings)

Google autotransformer and see something like: /Auto Transformer/is a kind
of electrical transformer, where primary and secondary shares same common
single winding.

That is, the windings are  N O T  isolated. An isolation transformer has
independent windings.



Otherwise very good advice!


73,

Patrick NJ5G

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>