Towertalk
[Top] [All Lists]

[TowerTalk] FW: Hy-Gain Rotor Control Boxes

To: <towertalk@contesting.com>
Subject: [TowerTalk] FW: Hy-Gain Rotor Control Boxes
From: "Matt" <maflukey@gmail.com>
Date: Wed, 14 May 2014 22:58:25 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi Jim,

To my knowledge...

Series 1 & 2 control boxes for the early Ham-M produced 1957-1959 are not
compatible with any of the later model rotors.

Series 3, 4, and early series 5 boxes for the Ham-M produced 1959-1973 are
compatible but do not have an independent brake release switch.  

Series 5 boxes for the Ham-II (brown cover or black & white cover) with the
gold faceplates are compatible and feature the independent brake release
switch.

All for the Ham-III, IV, & T2X boxes are compatible, the T2X boxes added LED
indicators beginning in 1977.

Hope this helps.

Matt
KM5VI

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Jim
W7RY
Sent: Wednesday, May 14, 2014 8:01 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Hy-Gain Rotor Control Boxes

Is there any difference in the old Hy-Gain metal cased rotor controllers and
the newer black plastic controllers?

Thanks
73
Jim W7RY
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>