Date: Mon, 21 Jul 2014 05:14:38 +0200
From: LB3RE LJ3RE Stein-Roar Brobakken <post@lb3re.com>
To: Byron Tatum <bjtatum1@att.net>
Cc: "TowerTalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] TH-7DX Balun
HiIts a simple 1:1 current balun You can also use simple RF choke with 7-8 turn
of coax on 3-4" diameter RG8/RG213.? Then i use RFI clips 15mm about 10 pcs
from ebay is cheap instead of huge cost of something crappy. The BN4000 been
discussed here too in 2008
http://lists.contesting.com/_cq-contest/2008-08/msg00106.html
---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein Roar
Brobakken e-mail:post@lb3re.comhttp://la5o.wordpress.comwww.contesting.no
### 7-8 turns of 213u on 3-4 inch diam isnt gonna do a damn thing on 80m
band..waste of time. Stuff 4-5 turns of the same 213 u through 8-10 x 2.4
inch od type 31 cores..and then u have the real deal.
## The BN-86 is fubar. I destroyed 3 of em back in the 70s..with just low
swr and 1900w output cw + ssb. I had one on my 204ba, another one on the 80m
inverted vee....and the 3rd one on my 40m half wave sloper. I opened em up,
and the magnet wire was burnt to a crisp ! If hy gain – mfj is still selling
the bn-86 they are complete idiots. And ditto with the w2au big signal
balun...more junk.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|