Bob ,
Sheaves from McMaster-Carr http://www.mcmaster.com/#rope-pulleys/=szwb6p item
#3434T119. They're steel instead of aluminum. I'm in the process of replacing
mine. The main is pretty easy, it gets a bit tedious, but not terribly
difficult on the 2 inner. I'm replacing the 3/16" inner cable with 1/4".
Since you're replacing the sheaves, you'll be able to get the cable ends (with
the swaged in thimbles) thru the brackets.
GL!
73, Mike NF4L
On Jul 25, 2014, at 5:27 PM, Bob Farkaly <bob@farkaly.com> wrote:
> I'd like to replace the lifting cables, cable sheaves and pins. I can't find
> a source through a Google search, so I thought I would try the resources of
> the reflector. I have read that a new lifting cable set can be fabricated by
> a cable rigging company and stainless steel parts are available to replace
> the sheaves and pins. I am looking for sources.
>
> Any help appreciated.
>
> Thanks,
>
> Bob, K9RHY
>
>
>
> Bob Farkaly, K9RHY
> 4517 Topside Rd
> Knoxville, TN 37920-6055
> Telephone: 865-573-6322
> Mobile: 619-602-2653
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|