Towertalk
[Top] [All Lists]

Re: [TowerTalk] Long pole / simple, tall construction for small antenna

To: vegard@svanberg.no, towertalk@contesting.com
Subject: Re: [TowerTalk] Long pole / simple, tall construction for small antenna
From: mike repinski via TowerTalk <towertalk@contesting.com>
Reply-to: mikflathead@aol.com
Date: Sun, 26 Oct 2014 13:08:38 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 

 There are vendors that sell 4 foot long fiberglass tubes for mast's. This may 
work for your application. They also sell guying rings. Mike

 

-----Original Message-----
From: Vegard Svanberg <vegard@svanberg.no>
To: towertalk <towertalk@contesting.com>
Sent: Sun, Oct 26, 2014 11:54 am
Subject: [TowerTalk] Long pole / simple, tall construction for small antenna


Hi guys,

I work in broadband and from time to time we have customers we want to
hook up, but we're unable to gain a free line of sight from the customer
to the nearest tower.

There must be a free LOS, which means no trees, branches, mountains,
buildings etc.

The most problematic cases are when people live in areas surrounded by
trees.

Since cost is an issue here, we can't build towers for each and every
one. But I'm considering a low cost solution to get the antenna higher
in the air - often as much as 20 meters (about 65-70 feet) is required
to gain proper LOS.

So... I'm considering making a simple, cheap and tall construction.
I've been pondering either just putting together cheap and thin
aluminium tubes with guyings to stiffen the construction, or have
someone make something for me in composite materials. For instance poles
I can insert into one another to get the length (height) I need, also
here with guyings.

Apart from the pole itself, an issue is also proper anchoring in the
ground (rocky ground is easy, obviously, while sandy and muddy soil
could be tricky).

The weight of the antennas are only about 400 grams and the surface area
is small (HxW = ~300 x ~80 mm) so we're talking pretty light and simple
stuff here.

Before I go ahead and start constructing this myself, I was just
wondering if someone here has done something similar before, or know
someone who sell ready-made kits I can buy.

Thanks!

-- 
Vegard Svanberg <vegard@svanberg.no> [*Takapa@IRC (EFnet)]

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>