Towertalk
[Top] [All Lists]

[TowerTalk] JK Antennas Navassa5 element alingment

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] JK Antennas Navassa5 element alingment
From: "Bob, N5RP" <n5rp@roadrunner.com>
Date: Thu, 27 Nov 2014 17:25:20 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I seldom post to the list, being mainly a "lurker" out there, but...
I Recently assembled a JK402 in my very uneven and non-level backyard and 
trammed it up to the top of the tower.
While there are many parameters for decision making when selecting an antenna, 
I can honestly say that my JK antenna is probably the best antenna that I have 
ever owned when it comes to mechanical design, quality of materials, 
workmanship, and all around engineering.
I have an overwhelming feeling of personal pride every time I look up to the 
top of my tower, and see what I "assembled" and got into the air. JK put a lot 
of time and effort into their design. I put a lot of time and meticulous effort 
into the assembly and erection. The combination of both efforts made for a 
quality well beyond "average".
Pre-drilled holes and rivets are OK for some, I guess. I prefer s.s. fasteners, 
clamps, tight tolerances.
Bob-N5RP
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>