The "official name"of it from Rohn,,, was HW ...Made exclusely for Motorola
in the 60's.. It is on a 15 inch face,,, and should be treated as Rohn
25G...
DO NOT treat it as 45,, it is not that strong.. the leg diameter and gauge
is same as 25G The zig zag bracing is same as 25G
Rohn 45 is on a 18 inch face,, and 25 on a 12 inch face.... But,, A very
good tower....It is hard to find... 73 GL,, Dan N4GNR
-----Original Message-----
From: John Keating
Sent: Tuesday, June 9, 2015 4:16 PM
To: John Keating ; towertalk@contesting.com
Subject: [TowerTalk] Correction: Need documentation for Rohn HW (35G
/Motorola tower)
Sorry, meant "35G"
-----Original Message-----
From: "John Keating" <john.keating@sbcglobal.net>
Sent: 6/9/2015 12:55 PM
To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Need documentation for Rohn HW (36G / Motorola tower)
Does anyone have documentation for this tower? I called Rohn, they don't
have it any more. Tower was produced exclusively for Motorola years ago,
there are a number of them around.
John / KK6PLG
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|