This morning I was lowering my HDX572 and as it was almost down one of the base
ears that the raising fixture leg mounts to failed. Fortunately it was a slow
drop and the tower is still ok. If it failed while it was higher this could
have been a different story.
I will need a new raising fixture and a new HDX572 base. I have a like new
spare TRX-80HD raising fixture for my HDX589 so I should be ok there.
I posted some pics and will add more later today. From the looks of the break,
I am seeing rust (Not clean metal) where the welds were. Also I'm not sure if
the ear on the one leg that mounts to the raising fixture began to bend first
or not. But it is bent a hard 90 degrees now as you can see.
Anyone else see something like this in the past? This is an older US Tower so
I'm not sure if the bases are built better now or not for the mounting ear.
Go to my QRZ Page http://www.qrz.com/db/N7TR And look for the link called
HDX572 Raising Fixture Failure.
Rich N7TR
ex KI3V, N3AMK, WB3JOV
www.n7tr.com<http://www.n7tr.com>
http://www.qrz.com/db/N7TR
Telnet: dxc.n7tr.com N7TR DXCluster
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|