I have had a Force12 Delta 230-240 Yagi for quite some time and only
recently have I had the time to assemble and eventually install it on my
new tower. I have assembled all of the elements and I am ready to
install the elements to the boom. There is a discrepancy between the
hardware in the manual and what was actually shipped. The manual shows
all three hairpins to be 4 turns each, however, what was shipped was two
5 turn hairpins and and one 4 turn hairpin.
The antenna was purchased while Force12 was still being manufactured in
Texas. I have looked at the new owner's website InnovAntennas Force12
store and since it is one of the legacy antennas from Texas it does not
appear to be supported anymore.
I would appreciate any insight from anyone who has worked with, built or
installed this antenna to help me determine what I need to do. Is the
manual wrong? Was I sent the wrong parts?
Thanks,
Larry Yates
WA4PMA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|