A few years ago I was looking for a heavy duty 3" thrust bearing. If my
memory is correct, there is a German company that makes one that is split
and can be installed on an existing system. I found the company by using
a tower link on the OptiBeam website. Indecently, I wound up buying a
Luso bearing which is very nice.
John KK9A/4
To: <towertalk@contesting.com>
Subject: [TowerTalk] clamp on trhust bearing
From: "Jorge Diez - CX6VM" <cx6vm.jorge@gmail.com>
Date: Sun, 1 Nov 2015 08:20:58 -0300
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hello
I have a yaesu 065 thrust bearing broken up in the tower, after a rotor
replacement. Inside a mast with two antennas
I don´t want to remove all antennas and mast to replace the thrust bearing
from 200 ft tower, so wondering if there´s a CLAMP ON thrust bearing or
crapodine I can get to replace it without need to remove all antennas and
mast
Thanks,
Jorge
CX6VM/CW5W
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|