Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotor Position in tower

To: "h.duck" <h.duck@ameritech.net>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rotor Position in tower
From: Mike Fahmie via TowerTalk <towertalk@contesting.com>
Reply-to: Mike Fahmie <wa6zty@yahoo.com>
Date: Sun, 1 Nov 2015 23:29:51 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Advantages;Alignment of rotation centers is less critical.Need less rotor cable.
Disadvantage;Heavier load on rotor.More expensive mast.
-Mike-WA6ZTY

      From: h.duck <h.duck@ameritech.net>
 To: towertalk@contesting.com 
 Sent: Sunday, November 1, 2015 3:13 PM
 Subject: [TowerTalk] Rotor Position in tower
   
Could I get some input on placement of a rotor in a tower.  Is there an 
advantage to mount the rotor, say ten feet down from the top verses the 
usual three or four feet?

My rotor plate is not welded in place so I could place it at any level.

Thanks for any input.

Howard WA9YBW




---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>