How do,
Dave is having fun with a T2ZX and a TH-11:
Quote:::
I have a HyGain Tailtwister rotor mounted inside seven sections of Rohn 45. I
plan on placing a 10 foot mast into the rotor (2" O.D.
galvanized steel pipe), through a heavy duty thrust bearing, and on the mast, a
HyGain TH-11 (not exactly a featherweight itself).
My question is: How much weight will the Tailtwister rotor handle?
Is potentially this too much weight? I have been told that the HyGain rotors
will handle up to 1000 lbs of weight. While I'm not
close tot hat weight, this is a heavy amount. Any help would be appreciated.
Close Quote
Dave,
Google and the MFJ/Hy-Gain site are your friends. Hy-Gain recommends the
HDR-300, T2X, or the Ham IV for this antenna.
>From the T2X manual: Max Effective moment is 3400. You get this from the sum
>of turning radius and weight, so 22' times 88 lbs equals 1936, so that's in
>limits. Antenna weight is 88 lbs, so that shouldn't be a problem, given the
>triple bearing race of the T2X. T2X rated at 20 sq ft of area.......
In closing, I am neither an antenna Guru or an engineer, so you should only
consider what is in print, the MANUFACTURES print as in the
manuals.............. other wise, YMMV. OR you could spend the bucks and get a
REAL engineer to run the numbers.
Good luck with the project.
K9WN Jake
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|