Towertalk
[Top] [All Lists]

Re: [TowerTalk] antenna material 40M

To: towertalk@contesting.com, ScottW3TX@verizon.net
Subject: Re: [TowerTalk] antenna material 40M
From: K7LXC--- via TowerTalk <towertalk@contesting.com>
Reply-to: K7LXC@aol.com
Date: Tue, 9 Feb 2016 12:24:01 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
>  One of the best, if not the best, resources for building a  full sized 
40m 3 element Yagi is ON4UN's text "Low Band DXing"

>   Have fun with your project!  It will bring you great satisfaction when 
on  the air. 
 
    True - but you can have as much fun for a lot less.  IMO a comparable 
if not better system is to stack two 2L shorty  forties. Lots cheaper, 
comparable gain, choice of upper or lower antenna,  ability to beam 2 different 
paths and you  only need regular rotators to  turn them. 
 
    A local guy built a full-size 3L 40M beam and (this  was years ago) the 
middle chunk of aluminum for the boom was 300 bucks. Can't  imagine what 
the total  price was. Don't forget to throw in a couple of  grand for a prop 
pitch to turn the thing. 
 
Cheers,
Steve      K7LXC
TOWER TECH 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>