Towertalk
[Top] [All Lists]

Re: [TowerTalk] FYI: for owners of 15M6-125 yagis

To: "Jorge Diez CX6VM" <cx6vm.jorge@gmail.com>
Subject: Re: [TowerTalk] FYI: for owners of 15M6-125 yagis
From: "StellarCAT" <rxdesign@ssvecnet.com>
Date: Tue, 16 Feb 2016 18:02:09 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
hmmmm.... ok.

I am keeping the heft of the -125 antenna (I found 2 of them locally like new for almost 1/2 the M6DX price new) ... and converting them to the newer (i.e. better modeling having been done) 15M6DX. The 3" 0.125" wall is rated at a very high value (well past 125 MPH) according to Yagi Mechanical! Most of the elements with the exception of one are easily rated at 125+ MPH. That one ends up being 120.

Gary
K9RX



-----Original Message----- From: Jorge Diez CX6VM
Sent: Tuesday, February 16, 2016 2:17 PM
To: StellarCAT
Cc: tower
Subject: Re: [TowerTalk] FYI: for owners of 15M6-125 yagis

Converting a 15M6DX-125 to a 15M6DX?

Not understand, why?

The M2 antennas are over rated so will want to keep a stronger antenna

The 44ft boom wall is s joke!

I needed to replace my booms with the heavy duty version that they have to sell, but that you don't know of it till you have a problem and complain about this antenna

73,
Jorge
CX6VM/CW5W

Enviado desde mi iPhone

El 14 feb. 2016, a las 11:48, StellarCAT <rxdesign@ssvecnet.com> escribió:

I purchased two of these recently for a good price – both in what seemed to be great shape... I’m converting them to 15M6DX’s ... will be range testing the conversion soon using a hex-copter and a extreme light weight dipole/XG3 exciter ... anyway in rebuilding this antenna I found that where the boom sections come together, the swaged ends now have ‘slots’ where the bolt goes through! I’ll drill 2 new holes the proper diameter and then add heavy duty rivets to help ensure this doesn’t happen again. Only one of the 2 that I have has this – they were taken down from a stack so I can only guess that it doesn’t happen always or maybe the top antenna in that previous installation was the one that developed slots.

Gary
K9RX

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>