Last time I ran into this need, I made a cardboard replica of the plate, and
took that to local blacksmith/metal working shop, and 20 minutes later it
was fait accompli !! Zip Zap Zoop es worky worky ! 73 Mark AA6DX
-----Original Message-----
From: Mike Reublin NF4L
Sent: Tuesday, April 19, 2016 10:11 AM
To: k2xx@swva.net
Cc: towertalk reflector
Subject: Re: [TowerTalk] LM-470 Rotor Plate Needed
Joe, if you don't find one, contact Norm at
http://www.normsfab.com/index.html
73, Mike NF4L
On Apr 19, 2016, at 12:44 PM, Joe Giacobello, K2XX via TowerTalk
<towertalk@contesting.com> wrote:
If anyone has a spare LM-470 rotor plate, I would like to buy it. I'm not
sure if plates for other towers would also fit. The original triangular
plate is about 11" on each side.
If you can help me out, please let me know via e-mail or 540-745-6825.
73, Joe
K2XX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7539 / Virus Database: 4556/12064 - Release Date: 04/19/16
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|