Re: [TowerTalk] RG-304 for CMC ?

[Jim Brown <jim@audiosystemsgroup.com>]

On Sun,4/24/2016 10:03 AM, Jim Thomson wrote:
> Never heard of silver plated steel being used b4. 
That would be fine above about 10 MHz, but steel coated with anything 
greatly increases conductor resistance below a few MHz as compared with 
solid copper. You can see this in Belden's published data for their cables.
73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk