Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cushcraft A3WS with 30 meters

To: Elliott Lawrence <wa6tla@roadrunner.com>
Subject: Re: [TowerTalk] Cushcraft A3WS with 30 meters
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Fri, 6 May 2016 05:42:31 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

Correct ... that's what I get for writing that "late" last night.

73,

   ... Joe, W4TV


On 5/5/2016 11:16 PM, Elliott Lawrence wrote:
In California, 33’ 2” / 2 turns out to be 16’ 7”.  Maybe it’s less the further 
east you go!
Elliott WA6TLA

On May 5, 2016, at 6:20 PM, Joe Subich, W4TV <lists@subich.com> wrote:


According to the A3WS manual, the turning radius of the base antenna
is 14' 4".

The 30 meter extension (A103) manual says the driven element of the
modified antenna becomes 33' 2" long.  Since 33' 2" /2 is less than
14' 4" the A3WS with 30 meters has the same turning radius as the
unmodified antenna.

73,

  ... Joe, W4TV


On 5/5/2016 7:52 PM, Bill via TowerTalk wrote:

Quick question...

I know the turning radius for a Cushcraft A3WS WARC beam, but can not find any 
info for the turning radius of the antenna with the 30 meter add on element 
installed..

Anybody have that info?

Bill K4XS/KH7XS
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>