Hi Danny,
Rack and pinion is mostly for linear motion. I believe a worm gear with
direct drive or a chain drive would be a better choice. Using a worm gear
you have the breaking function built in. Good luck!
Bert, VE3NR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Danny
Pease
Sent: Wednesday, June 01, 2016 3:23 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] homebrew rotator
I have been intrigued with putting together my own antenna mast rotation
system and wondered if anyone has any info on using a rack and pinion gear
type system in conjunction with a linear actuator. If the rack and pinion
turns out to be too expensive, my second choice would be a chain drive with
the linear actuator.
Thoughts?
Danny NG9R
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|