Many towers are available in shorter lengths so they can be shipped UPS
This includes 25G at least at one time
There were many, very light duty aluminum towers in 8' sections made of
a soft, cheap grade Aluminum. These have long since ceased production
and information is sparse to non available.
These towers are only good for holding a small VHF vertical, or wire
antenna._*They are not safe to climb!
*_
73
Roger (K8RI)
On 7/24/2016 Sunday 1:13 AM, Jeff Liebermann wrote:
JV (K6HJU) obtained a rather odd aluminum tower and needs help
identifying the manufacture in order to obtain a spec sheet.
Photos:
http://802.11junk.com/jeffl/pics/aluminum-tower/
We've done the usual Google image searches. Most aluminum
towers are welded, not assembled with riveted circular clamps.
We've called Aluma Tower and skimmed through the Glen Martin
tower offerings, but nothing was found that was similar. What's
really odd is that each tower section is only about 7ft long,
instead of the usual 10ft. The hardware seems to be US standard,
not metric, but I want to double check this.
There are some barely legible markings on one of the cross braces.
GALCO 13-199ASSY786G420-110
This might be the company:
http://www.galco.com
Their web pile shows "signal tower" parts but no towers or tower
sections:
http://www.galco.com/scripts/cgiip.exe/wa/wcat/catalog.htm?cat=SIGN&search-desc=Signal%20Tower
Does anyone recognize this tower?
--
73
Roger (K8RI)
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|