It seems like with would be easier to unplug the cable at the rotor and look
at the wiring.
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] Help needed to wire up Yaesu G-800S Rotor cable
to the controller
From: "Scotty" <scotty@ashiko.com>
Date: Sat, 30 Jul 2016 03:38:06 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
My Ham friend had a stroke and cannot find his color-code to pin-number
paper
for the 5 wires coming from the Yaesu 800S rotor on his tower.
What tests using a multimeter, etc. can I perform to the end of the rotor
cable
in his radio room to find out what color wire goes to which of the 5 pins on
the controller box?
Thanks for any ideas you can give.
Scotty W7SW
W7SW@ARRL.NET
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|