Date: Sat, 3 Sep 2016 16:50:33 -0000
From: <john@kk9a.com>
To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] LMR600 male DIN
I would not use LMR600 for the runs to the tower. Even the small LDF4 has
less loss, it is tougher, UHF, N and DIN connectors are readably available
and if purchased surplus it is cheaper than LMR600. If you care about coax
loss I would look at larger Heliax.
John KK9A
## why would ldf4..aka 1/2 inch heliax, have less loss than LMR-600DB ?
600 uses a 5.5 gauge center conductor..which is pretty big. both are foam.
stated loss from both manufacturers is almost identical. Having said that,
1/2 inch
heliax could be obtained locally pretty cheap, brand new.
## That RFS brand heliax is the bomb. Corrugated Aluminum shield...and a
corrugated
copper center conductor = very flexible. u can get it in several sizes, up
to 1.25 inch.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|