If this is for 80m and it is a 1/4-wave side square, the verticals need to be a
little less than 50 feet away from the tower, not 33 ft.
> On Monday, September 26, 2016 2:50 PM, Bill via TowerTalk
> <email@example.com> wrote:
> Thanks to all who responded to my post on 4 squares.
> From what I've read, my plan will be to:
> First, run a single rope from the 90 ft tower, which will give me a ground
> mounted 60ft wire vertical 33 ft away, I'll make up the rest by running the
> rest of the wire about 5-6 feet back to the tower along the rope. I'll
> temporarily lay about 20 radials on the ground and see how it plays. If it
> looks like it's working in RBN tests compared to KH6LC's 4 square,
> I'll proceed with the rest of the system.
> I'm curious what most of the guys are using for their power dump in the 4
> Bill K4XS
> TowerTalk mailing list
TowerTalk mailing list