That switch merely controls relay coil current.
The relays do the heavy work. You don't need
a lot of current rating.
Rick N6RK
On 11/25/2016 3:24 PM, K6UJ Bob Harmon wrote:
The up/down switch on the control box for my US Tower HDX589-MDPL needs to
be be replaced. I may call US Tower next week and see if they have a
replacement switch but I removed it and it doesn't look to be anything
special. I'm pretty sure it is a 3-pole double throw toggle switch.
Its hard to read the info on the switch but it looks like it is rated for
10A 250VAC and 15A 120VAC. Cant make out the other info.
Anyone replace one of these ? I dont have the schematic for the
control box which would help to figure it out.
Bob
K6UJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|