Towertalk
[Top] [All Lists]

[TowerTalk] Which Rohn Thrust bearing to use

To: towertalk@contesting.com
Subject: [TowerTalk] Which Rohn Thrust bearing to use
From: Dave Thompson <thompson@mindspring.com>
Reply-to: Dave Thompson <thompson@mindspring.com>
Date: Sun, 4 Dec 2016 16:27:21 -0500 (GMT-05:00)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
After many years of using a crank up I am switching to a Rohn 45 guyed tower. I 
plan to use my 30 year old laddermast to mount a Tennedyne original T-10 and 
then mount my 2 el Cushcraft 40 above that by 9 feet.  I am looking at Thrust 
bearings.  I used Fafnir bearings on the crank up but I am looking at the TB-3 
and TB-4 on the Rohn 45.
The laddermast is 2.25" so it looks like I need the TB-4 as the max on the TB-3 
is 2".

Is this right?

73 Dave K4JRB 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>