Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yaesu G-1000DXA Rtor in LM-470?

To: <k2xx@swva.net>, "TowerTalk" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yaesu G-1000DXA Rtor in LM-470?
From: "K0DAN" <k0dan@comcast.net>
Date: Thu, 11 May 2017 13:03:31 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
It is pretty straightforward, altho you need the proper mounting plate for the rotor, and it needs to be low enough in the top section that it has vertical clearance.

GL es 73
dan
k0dan

-----Original Message----- From: Joe Giacobello, K2XX via TowerTalk
Sent: May 11, 2017 12:24
To: TowerTalk
Subject: [TowerTalk] Yaesu G-1000DXA Rtor in LM-470?

I have to replace my current rotor, and I have an opportunity to buy a
G-1000 rotor.  Does anyone know of any problems installing a G-1000 in
an LM-470 or is it pretty much straight forward?

Thanks for your help.

73, Joe
K2XX
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>