Yours maybe...mine not so well. The cast clamps will break if you try to tighten
them securely. Yaesu finally put holes in the clamps for a through bolt but I
don't
want to do that. The constant movement of the antenna will elongate the holes
in the Al in short order. A very poor design!
73, Roger
On 5/18/2017 9:21 PM, john@kk9a.com wrote:
A solution to what? They are adjustable for various size masts and they
grip it well.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu mast clamps
From: Roger D Johnson<n1rj@roadrunner.com>
Date: Thu, 18 May 2017 16:32:36 -0400
Does anyone have a good solution to the cast aluminum mast clamps used
on the G-1000 rotor.
73, Roger
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|