Towertalk
[Top] [All Lists]

Re: [TowerTalk] G-2800DXA

To: "john@kk9a.com" <john@kk9a.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] G-2800DXA
From: "Cox, Norman R." <nrc@mst.edu>
Date: Thu, 10 Aug 2017 01:30:43 +0000
List-post: <mailto:towertalk@contesting.com>
There are some equations given in the instruction manual that allow you to 
determine whether the rotator will handle your beam.  I believe your can look 
up the manual at the manufacturer's site.

Best wishes,

Norm

KE0ZT



________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of john@kk9a.com 
<john@kk9a.com>
Sent: Wednesday, August 9, 2017 7:25:18 PM
To: towertalk@contesting.com
Subject: [TowerTalk] G-2800DXA

If you're questioning if a rotator is big enough it probably is not.  You
will be money ahead by buying the Yaesu G-2800DXA, it is a very nice
rotator.

John KK9A


To:     "towertalk@contesting.com" <towertalk@contesting.com>
Subject:        [TowerTalk] (no subject)
From:   Russ Dearmore via TowerTalk <towertalk@contesting.com>
Reply-to:       Russ Dearmore <champsruss@yahoo.com>
Date:   Wed, 9 Aug 2017 18:21:06 +0000 (UTC)
List-post:      <mailto:towertalk@contesting.com>
I purchased a used Force 12 EF-420/240N and plan to reassemble it this fall
and
be ready for the big contests this winter.  I'll be putting it on a 72' US
tower that goes down to about 22'.  I didn't get a lot of paperwork with it,

about 4 pages of drawings and dimensions, and am guessing that is
everything.
Once a company goes out of business it gets tough to find anything on an
antenna and was wondering if there were more resources that I just can't
find.
I'd appreciate any help especially anyone experienced with this model.  It
weighs 140 lbs and is my first big beam.  At this point of the sun cycle I
think I'll really enjoy 40m.  I plan to use Nolox or anti-sieze on all
joints.I
got it for about a tenth of it's original price so I couldn't resist.  I
only
have a G800 for a rotor and was wondering if a G1000 was good enough or
should
I go up to the G2800?  Thanks for all comments...  Russ   K5ZZR

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>