Jim wrote:
"In your case, one could put a 1:1 transformer at the remote building,
primary side fed from the house, secondary side feeding your subpanel,
where neutral and ground would be connected(because it's an entirely
separate system). There would be no "ground path" from house to garage."
I wonder what the breakdown voltage would be between the primary and secondary
of such a transformer, and what might happen to it of the tower took a direct
strike (tower bonded to the sub-panel)?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|