Towertalk
[Top] [All Lists]

Re: [TowerTalk] Sheave source wanted for Rohn EF2545 erection fixture

To: George Dubovsky <n4ua.va@gmail.com>, jz73@verizon.net
Subject: Re: [TowerTalk] Sheave source wanted for Rohn EF2545 erection fixture
From: Clay Autery <KY5G@montac.com>
Date: Thu, 18 Jan 2018 15:34:41 -0600
List-post: <mailto:towertalk@contesting.com>
Excellent suggestion....  consider a proper bronxe bushind with matching 
shaft/fastener, and if there's enough material, consider machining for an 
actual bearing....  altgough likely not enough.
I'm an over-engineer which is why I initially recommended a whole new sheve 
with bearing.


Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: George Dubovsky <n4ua.va@gmail.com> 
Date: 1/18/18  11:38  (GMT-06:00) To: jz73@verizon.net Cc: towertalk 
<towertalk@contesting.com> Subject: Re: [TowerTalk] Sheave source wanted for 
Rohn EF2545 erection
  fixture 
Chuck it in a lathe, bore slightly oversize, press in brass or steel
bushing as desired. Probably 15 minutes of work in a machine shop.

73,

geo - n4ua

On Thu, Jan 18, 2018 at 12:30 PM, Jon Zaimes <jz73@verizon.net> wrote:

> I'm trying to replace the worn sheave on the top pulley assemblies of two
> Rohn EF-2545 gin poles. This appears to be cast aluminum with a 5/16" bolt
> going through the center hole. The sheaves measure 2 3/8" outer diameter,
> and are 5/8" wide. The center hole in the sheave has worn with time such
> that these are now wobbly and risk pinching the haul rope if it jumps out
> of
> the sheave.
>
> I tried contacting Rohn and they directed me to their distributors. The
> first I called said they couldn't help me, and the second said they didn't
> have it but would try their contact at Rohn.
>
> There is no listing for this part in the online Rohn catalogs for this.
> I've
> been unable to match up anything of this size or close from any industrial
> suppliers thus far.
>
> Anyone have a source?
>
> There's a photo here: http://www.aa1k.us/sheave
>
>
>
> 73/Jon
>
>
>
> Jon P. Zaimes, AA1K
>
> Tower climber for hire
>
> http://www.aa1k.us/
>
>
>
> Reviews of AA1K tower work on eham website:
> http://www.eham.net/reviews/detail/12922
>
>
>
> Hug your favorite tower every day, and always stay connected to it.
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>