Does the same process of estimation for adjustment of element length apply
to coil-loaded yagis as for, say, wire or other dipoles? I.e., in which one
takes the percentage of measured frequency above or below desired resonance
and lengthens or shortens, respectively, the total element length? In
particular for the coil-loaded yagi, that percentage adjustment would be
applied to the element length outside of the coils?
73, AI6LY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|