What month is the article in QST?
I've had many dipoles through tree usually for support and they worked well and
I worked lots of Dx.
Never had any arcing or fires.
Looked I had an RF issue last installation 230 OCF over trees at 40' and when
increased power swr was erratic.
Had 450 ladder line, down to 4:1 balun even tried coax at the feed point with a
wound choke same issue.
A good portion of the antenna went over the top of trees.
73-
W1JCW
John
On Tue, Jan 23, 2018 at 8:05 AM, Dick's <rcblumen@centurylink.net> wrote:
> There is an article in the last issue of QST that looks at the effect
> trees have on antennas in/near trees.
>
> Dick, K0CAT
>
>
>
>
>
> On Jan 23, 2018, at 1:24 AM, Steve Boone <w7wm.boone@gmail.com> wrote:
>
> This is a topic that I have never seen addressed and Google has not
> revealed any similar situations:
>
> I am installing a quarter wave, 160m inverted-L between a 40'
> Ponderosa Pine and my tower. The first 30' of the antenna will run
> parallel to the tree trunk and through the branches. I am using copper
> coated wire for the element. I have four elevated radials at the 10' level.
>
> My concern is whether I need to worry about contact between the wire
> and the tree. With the very low humidity that we get during Colorado
> summers, I am wondering if there is a fire danger here.
>
> I will be running a 1.5 kW.
>
> Thanks,
>
> -Steve, W7WM
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|