The TMM433 SS spec I have is for 1" x 27" length bolts and the PE
analysis for the TMM433HD (which I own) spec's 1 1/8" x 27" bolts which
I bought from McMaster-Carr. Either with heavy hex nuts, 2 above and 1
below the mounting plate.
Grant KZ1W
On 5/15/2018 12:12 PM, Joe Partlow wrote:
Other than US Tower, where would I get the nuts and bolts use to attach a
TMM-433HD to its base? The docs call them out as 0.75 inch diameter (A325N)
1.25 inch (length?) and dosn't say anything about washers.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|