Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Rotor loop coax

from [Larry Banks] [Permanent Link][Original]
To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Rotor loop coax
From: "Larry Banks" <larryb.w1dyj@verizon.net>
Date: Sun, 19 Aug 2018 13:52:53 -0400
List-post: <mailto:towertalk@contesting.com> 
Hi Terry,

I would suggest Davis BuryFlex (r).

73 -- Larry -- W1DYJ
-----Original Message----- From: Terry Brown 
Sent: Sunday, August 19, 2018 13:07
To: towertalk@contesting.com
Subject: [TowerTalk] Rotor loop coax
I finally got approval to put up my tower and 10-15-20 meter beam. Is RG 213 the best and most flexible coax to use from the radiator for the loop for tower rotation? It will connect to LMR-400 down tower leg. 

Thanks!

Terry
N7TB
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [TowerTalk] Do some HF Tri-Banders receive more noise than others?, rlvz--- via TowerTalk
Next by Date:  Re: [TowerTalk] Do some HF Tri-Banders receive more noise than others?, Bob Shohet, KQ2M
Previous by Thread:  Re: [TowerTalk] Rotor loop coax, Timothy Coker via TowerTalk
Next by Thread:  Re: [TowerTalk] Rotor loop coax, Jim Brown
Indexes:  [Date] [Thread] [Top] [All Lists]