Towertalk
[Top] [All Lists]

Re: [TowerTalk] Big Rak and HDX-555

To: "'Kent Olsen'" <kilo6dko@gmail.com>
Subject: Re: [TowerTalk] Big Rak and HDX-555
From: "Jim" <jimw7ry@gmail.com>
Date: Sun, 26 Aug 2018 19:00:51 -0500
List-post: <mailto:towertalk@contesting.com>
I had a HD chrome molly mast as well.

 

73

Jim W7RY

 

 

 

From: Kent Olsen [mailto:kilo6dko@gmail.com] 
Sent: Sunday, August 26, 2018 6:51 PM
To: jimw7ry@gmail.com
Cc: john@kk9a.com; towertalk@contesting.com
Subject: Re: [TowerTalk] Big Rak and HDX-555

 

Jim

 

The mast clamp on mine slipped after 6 months. I took it down and tightened the 
bolts again with blue thread locker this time and 4 months later it slipped 
again. I think the the problem is I used a chrome moly mast that the clamp 
could not bite into. Your mileage may vary.

 

I cant comment on the controller since I have never owned the stock one. 

 

 

Thanks

73

Kent

N6WT

 

 

On Sun, Aug 26, 2018 at 4:39 PM Jim <jimw7ry@gmail.com 
<mailto:jimw7ry@gmail.com> > wrote:

I have an older OR2800 with the M2 controller. Used it with N1MM and never
had an issue of any kind with the rotor or controller.

It works great!  I had it on a TH7 with a XM240 above it on a 70' Rohn 45.

Stock mast clamp. NEVER did it slip in the 14 years I had it up.

I'm puzzled why you would think the mast clamp and controller are junk?


73
Jim W7RY



-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com 
<mailto:towertalk-bounces@contesting.com> ] On Behalf Of
john@kk9a.com <mailto:john@kk9a.com> 
Sent: Sunday, August 26, 2018 3:03 PM
To: towertalk@contesting.com <mailto:towertalk@contesting.com> 
Subject: Re: [TowerTalk] Big Rak and HDX-555

>From what I have read on towertalk, it is a good rotator if you throw away
the mast clamp and controller.

John KK9A


From:   Kent Olsen <kilo6dko@gmail.com <mailto:kilo6dko@gmail.com> >
Date:   Sun, 26 Aug 2018 08:14:01 -0700

Phil


I went with the M2 Orion 2800 rotor. It fits in the tower completely. It has
been up for 3 years with a SteppIR DB36 with a NN4ZZ tilt plate. This is a
very heavy combo, I have not had a bit of trouble.

Thanks
73
Kent
N6WT

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com <mailto:TowerTalk@contesting.com> 
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com <mailto:TowerTalk@contesting.com> 
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>