Hi, gang,
I'm thinking about building two chokes that can be inserted at/near antennas or
at/near my radios. I plan to use rg-400 and an FT-240-31 core built inside a
plastic 4-inch utility box from the local big box store.
To maximize flexibility, and because I often use RG-6/RG-11 in addition to the
usual 50-ohm cables, I'm wondering if I can get away with building the chokes
with chassis-mount "F" connectors and the usual SO-239 connectors wired in
parallel and mounted close together, side by side?
That is, the input and output sides of the box would each have a pair of
coaxial connectors wired in parallel. If I'm using RG-6 I can use the "F"
connectors. If I'm using RG-6 I can use the SO-239s (one connector on each side
at a time!).
Will this cause problems?
Thanks,
--Kirk, NT0Z Rochester, MN
My book, "Stealth Amateur Radio," is now available from www.stealthamateur.com
and on the Amazon Kindle (soon)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|