All:
I have an 80 meter dipole fed with 300 ohm ladder line that needed to be
moved to a different location. The antenna is 110 feet long and the
ladder line is attached to a DX Engineering 1:1 tuner balun with a short
10 foot run of coax. The length of the ladder line is cut to an odd
multiple of the 80 meter wavelength.
The SWR on 80 meters was very high so I trimmed the ladder line a few
inches which lowered it from 25:1 to 18:1. I continued to trim a few
more inches and noticed no change: changing the coax length had no effect.
My question is: is it normal to expect an SWR to be that high on 80
meters with this setup? Should I continue trimming the feed line to find
a length that presents a more reasonable SWR or look for other issues
with the antenna system? The ladder line does not touch the ground, it's
not folded onto itself and it's not near any metal object.
Tony
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|