I imagine that cost is K9OM's deterrent and not the noise. Having a motor
spinning at 10,000 RPM turning your antennas is a sweet sound!
John KK9A
-----Original Message-----
From: N2TK, Tony [mailto:tony.kaz@verizon.net]
Sent: Monday, March 04, 2019 6:49 PM
To: john@kk9a.com
Cc: towertalk@contesting.com; rlvz@aol.com
Subject: Re: [TowerTalk] Rotor options besides a Prop Pitch?
The prop pitch will turn a house. But they can be loud. Some reduce the voltage
so they don’t scream. Use rubber gaskets for isolation based on my experience.
Nothing stronger than a prop pitch. Now using the large Prosistel with a 500
ohm pot with a Green Heron controller from WX0B
Tony
Sent from my iPhone
> On Mar 4, 2019, at 7:35 PM, <john@kk9a.com> <john@kk9a.com> wrote:
>
> I turned a very heavy-duty home brew 20m beam with a 36' boom and a 2el 40m
> Optibeam in windy Aruba with a Yaesu G-2800 DXA without any issues, ever.
>
> John KK9A
>
>
> RVZ rlvz at aol.com
> Hi Guys,
>
> I'd like to thank everyone for your rotor recommendations regarding my post
> seeking the "strongest and most reliable rotor". The "Prop Pitch" was the
> big winner with almost no competition!
> I'm seeking strong and reliable rotors for multiple towers and may not need
> a PropPitch for towers with smaller antenna loads. Such as, for a tower
> holding a single HF Yagi with a 36' to 42' boom and 18 to 20 sq.ft. of wind
> load, besides a Prop Pitch are there any strong and reliable rotor options
> for this size antenna load?
>
> Thanks & 73,
> Dick- K9OM
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|