G’day all;
After many years/decades of minimal amateur radio work, I finally have a tower
with rotor and beam, dipole and vertical. I finally installed a five position
remote coax switch. I would like to weatherproof the assembly by enclosing it
in a weather tight case. The case or enclosure could be found at the local big
box store or electrical contractor’s supply store, which should measure; Width
= 10”, Depth = 9” and Height = 12”.
If you have a great suggestion for suppliers, please let me know.
Plus: I am at a loss for the weatherproof pass-throughs for the RFC 600 & RG 8
coax. Believe there was a distant discussion for such items.
Thank you for the suggestions.
Jim - K7BIE - Somewhere now enjoying PureMichigan
James Forsman
jamesforsman@me.com
https://jrquark.smugmug.com/HamRadio
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|