Why do I feel like some of these solutions will end up on You Tube under
epic failures?
On Fri, Mar 29, 2019 at 9:33 AM Chris <EZRhino@fastmovers.biz> wrote:
> Rent one of those big air compressors that are used to power jackhammers,
> plumb one end into the conduit and blow them out!
>
> Chris
> KF7P
>
>
> On Mar 29, 2019, at 10:14 AM, Jim Thomson wrote:
>
> > Date: Thu, 28 Mar 2019 22:46:04 -0700
> > From: Grant Saviers <grants2@pacbell.net>
> > To: towertalk@contesting.com
> > Subject: [TowerTalk] Conduit tails
> >
> > <Any other ideas or proven solutions?
> >
> > <Grant KZ1W
> >
> > ### Ruger 204..with hornady V max rounds.
> >
> > ## Dux seal at one or both ends might work..
> > or dux seal at one end..and mesh at the other end.
> >
> > ## SS or plane steel wool pads also works, stuffing into the bottom
> > end of the conduit..and dux seal at top end. Mice chew on the steel
> wool pads...
> > they ingest em, they die asap.
> >
> > ## nitrogen will also kill em...since no oxygen.
> >
> > ## Dux seal at top end...and dux seal at bottom end...but with a straw
> > through it, would allow for any condensation to drain out the lower
> end.
> >
> > Jim VE7RF
> >
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
- 73 -
- Joe W6JWP
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|