Towertalk
[Top] [All Lists]

Re: [TowerTalk] installing surge arrestor on a copper plate

To: "cx6vm.jorge@gmail.com" <cx6vm.jorge@gmail.com>, Tower Talk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] installing surge arrestor on a copper plate
From: DALE LONG <dale.long@prodigy.net>
Reply-to: "dale.long@prodigy.net" <dale.long@prodigy.net>
Date: Wed, 3 Apr 2019 17:58:25 +0000 (UTC)
List-post: <mailto:towertalk@contesting.com>
Better to use stainless steel washers between dis-similar metals.
73,
Dale- N3BNA

Sent from Yahoo Mail on Android 
 
  On Wed, Apr 3, 2019 at 12:35 PM, Jorge Diez - CX6VM<cx6vm.jorge@gmail.com> 
wrote:   Hello

I will be doing coaxial grounding on shack entrance.

Need to install ArraySolutions AS-303 surte arrestors on a copper surface.

AS-303 have aliminium case. So, i will install them with two screws
directly on the copper plate or is best to apply something to the two
surfaces that will be in contact?

thanks!

-- 
73,
Jorge
CX6VM/CW5W
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
  
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>