I was unaware of OSH Park so asked around locally if anyone had used
them. Good input from one who has.
Was also told of another in the area, Sunstone, maybe a bit more
expensive, but with free design SW. Here is a link to their site.
https://www.sunstone.com
<https://www.sunstone.com/?gclid=Cj0KCQjwtr_mBRDeARIsALfBZA5PYAsOFYtrT3s0FgobwCtKJ6OCn8OFz_6YxFcRWbZcKh1dAtwZfVgaAtpkEALw_wcB>
Don T W7WLL
On 5/5/2019 4:53 PM, VE6WZ_Steve wrote:
Good experience with OSH Park in Oregon for making nice boards. Double side with
solder mask and silk screen. https://oshpark.com/ <https://oshpark.com/>
I use KiCad for design and PCB layout. OSH Park will take the PCB file as a
direct upload from KiCad. Ordering the board right from KiCAd take about 5
minutes!
Pretty easy to learn KiCad. Free ware here: http://kicad-pcb.org/
<http://kicad-pcb.org/>
73, de steve ve6wz
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|